Viewing 1 to 1 (1 Total)
Re: Paint Prep

The Captain

Total Posts: 20
Joined: February 13, 2015

Answer: We use Dawn for almost all grease cutting needs. Scrub with a brush, high pressure spray to get into the cracks and crevices. If you feel like oil is still in the wood, use Smith’s CPES as a primer. It will penetrate the oil and wood fibers, this seems to be the best solution on old wood for improved adhesion. I would allow a week or so to dry depending on the humidity levels after the wash, a fan will help.

Posted on February 13, 2015 at 6:09 PM
Display Messages: Threaded     Flat
0 Replies